المساق: New Zealand Certificate in Electrical Engineering Theory (Level 3) Stream B (2020)، Section: Summative Test 1 | WelTec Moodle

الصفحة الرئيسية للمساق الدراسي

Summative Test 1

  • Summative Test 1

    The material in the above sections all contributes to Summative Test 1. The original date was 8 April 2020, but this is delayed due to the disruption caused by the Covid-19 pandemic.

    When classes eventually resume, Summative Test 1 will occur. Summative Test 1 will be done on paper in the classroom.

    Please make sure you're up-to-date by doing all of the assignments and worksheets.

    • معاينة تلقي علامة يحرز درجة النجاح

      This is a practice test for Summative Test 1. The questions are in the same format as the Summative Test 1, and the questions are the same size and same order of difficulty.

      The minimum passing grade is 60%, or 48 marks, as is with the "real" Summative Test 1.


      Instructions from the "Real" Summative Test 1

      Here are the instructions from the real Summative Test 1. These instructions will apply when Summative Test 1 is sat.

      Please read carefully before starting this assessment.

      This is a theory assessment to be completed under examination conditions.

      A maximum of 90 minutes is allowed to complete this test.

      This is a closed book test.

      A scientific calculator is required and must not be a programmable calculator.

      Cell phones and other electronic devices are not allowed.

      60% of the total marks allocated must be achieved to pass the test.

      All assignments must be correctly completed and returned before the test can be attempted.****

      All working should be correctly shown to attain all allocated marks for that question.

      **** This requirement has been removed as of 2020.